How is Reglazing of a Bathroom Done? Explain in Brief

Reglazing a bathtub is a low-cost technique to refresh an outdated fixture while also removing scratches, chips, and stains. A reglazed bathtub can seem brand new when done correctly, and with appropriate care, it can last for years. The length of time your new finish lasts is determined by the person who applied it, the materials he used, and how you clean and maintain the tub afterwards.

Elaborating the process in brief:

To reglaze a bathtub, you must first remove the existing glaze. Professionals of Bathtub Reglazing NJ usually perform this with hydrofluoric acid, then rinse and sand the tub. After removing the old finish, the expert cleans the tub to remove debris, dust, and other contaminants, as well as fill any holes or fractures. The tub is now ready for glazing. Professional refinishers often use two coats of fast-drying epoxy to assure adequate adhesion of the finish coat, followed by a polyurethane topcoat. These finishes are usually sprayed on for a smooth, even finish, and then polished to high gloss brilliance.

Maintenance:

If you've had your bathtub reglazed, you'll need to take special care of it to avoid scratches, chipping, and discolouration. The Bathtub Reglazing New Jersey takes care. Bleach, steel wool, or abrasive cleaners should never be used on a reglazed bathtub because they will harm the coating. Instead, clean with nonabrasive, bleach-free kitchen cleansers. Bathtub mats with suction cups can also rip the coating, so avoid them and use a urethane polish every six months to keep it looking new.

For more details, visit https://www.abathreglazing.com/